1
Download MSI P240 Specifications
Transcript
The overall system architecture for the p260 and p24L is shown in Figure 4-9. DIMM DIMM SMI DIMM DIMM SMI DIMM DIMM SMI DIMM DIMM SMI POWER7 Processor 0 GX++ 4 bytes PCIe to PCI P7IOC I/O hub SMI DIMM DIMM SMI DIMM DIMM SMI DIMM DIMM SMI To front panel USB controller Each: PCIe 2.0 x8 I/O connector 1 4 bytes each DIMM DIMM HDDs/SSDs SAS I/O connector 2 POWER7 Processor 1 Each: PCIe 2.0 x8 P7IOC I/O hub ETE connector Each: PCIe 2.0 x8 Flash NVRAM 256 MB DDR2 TPMD Anchor card/VPD FSP Phy BCM5387 Ethernet switch Systems Management connector Gb Ethernet ports Figure 4-9 IBM Flex System p260 Compute Node block diagram In this diagram, you can see the two processor slots, with eight memory slots for each processor. Each processor is connected to a P7IOC I/O hub, which connects to the I/O subsystem (I/O adapters and local storage). At the bottom, you can see a representation of the service processor (FSP) architecture. The IBM Flex System p460 Compute Node shares many of the same components as the IBM Flex System p260 Compute Node. The IBM Flex System p460 Compute Node is a full-wide node, and adds additional processors and memory along with two more adapter slots. It has the same local storage options as the IBM Flex System p260 Compute Node. 74 IBM Flex System p260 and p460 Planning and Implementation Guide
