Download Whirlpool WTW5700XW Specifications

REMOVING THE LID SWITCH/LOCK ASSEMBLY
The lid switch/lock assembly is located under
the top on the front right-hand side.
Screws
WARNING
Clips
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Figure 2
5. Remove the two (2) mounting screws securing the switch to the top,
see figure 2.
1. Unplug washer or disconnect power.
6. Remove the switch.
2. Turn off the water supply to the washer.
7. Unclip the harness from the top, see figure 2.
3. Remove the control panels’ rear panel.
8. Unplug the harness from the control.
4. Raise the top on the hinges,
see figure 1 and the section:
“REMOVING THE TOP”.
Switch
Harness
Figure 1
4-9