Download Emerson MVME6100 Technical data
Transcript
Pin Assignments 5.3.1 SCON Header (J7) A 3-pin planar header allows the choice for auto/enable/disable SCON VME configuration. A jumper installed across pins 1 and 2 configures for SCON always enabled. A jumper installed across pins 2 and 3 configures for SCON disabled. No jumper installed configures for auto SCON. The pin assignments for this connector are as follows: Table 5-16 SCON Header (J7) Pin Assignments 5.3.2 Pin Signal 1 SCONEN_L 2 GND 3 SCONDIS_L Boundary Scan Header (J8) The 14-pin boundary scan header provides an interface for programming the on-board PLDs and for boundary scan testing/debug purposes. The pin assignments for this header are as follows: Table 5-17 Boundary Scan Header (J8) Pin Assignments Pin Signal Signal Pin 1 TRST_L GND 2 3 TDO GND 4 5 TDI GND 6 7 TMS GND 8 9 TCLK GND 10 11 NC CPU_BSCAN_L 12 13 AW_L GND 14 MVME6100 Single Board Computer Installation and Use (6806800D58E) 97