Download Emerson MVME6100 Technical data
Transcript
MOTLoad Firmware Most MOTLoad tests can be organized to execute as a group of related tests (a testSuite) through the use of the testSuite command. The expert operator can customize their testing by defining and creating a custom testSuite(s). The list of built-in and user-defined MOTLoad testSuites, and their test contents, can be obtained by entering testSuite -d at the MOTLoad prompt. All testSuites that are included as part of a product specific MOTLoad firmware package are product specific. For more information, refer to the testSuite command description page in the MOTLoad Firmware Package User’s Manual. Test results and test status are obtained through the testStatus, errorDisplay, and taskActive commands. Refer to the appropriate command description page in the MOTLoad Firmware Package User’s Manual for more information. 3.3.3 Command List The following table provides a list of all current MOTLoad commands. Products supported by MOTLoad may or may not employ the full command set. Typing help at the MOTLoad command prompt will display all commands supported by MOTLoad for a given product. For a detailed description of these commands refer to the MOTLoad Firmware Package User’s Manual. Table 3-1 MOTLoad Commands Command Description as One-Line Instruction Assembler bcb Block Compare Byte/Halfword/Word bch bcw bdTempShow Display Current Board Temperature bfb Block Fill Byte/Halfword/Word bfh bfw blkCp Block Copy blkFmt Block Format blkRd Block Read blkShow Block Show Device Configuration Data MVME6100 Single Board Computer Installation and Use (6806800D58E) 33