Download Mazda 2002 626 Specifications
Transcript
DYNAMIC STABILITY CONTROL Connector Removal Note 1. Rotate the lock lever 40° to the direction A, then push the lock lever to the direction B. Caution • After rotated the lever 40°° , do not push the lock lever to the direction C. The lock lever will be damaged. 2. Verify that the lock lever is completely returned. 3. Remove the harness side connector to the direction D. A6E6920W011 DSC HU/CM and Bracket Removal/Installation Note 1. When removing/installing the DSC HU/CM from/to the vehicle, attach a strip of tape on the DSC HU/CM connector to prevent brake fluid from entering. Connector Installation Note 1. Verify that the connection part and waterproof packing are free of foreign material, then connect the connector. 2. Verify that the lock lever is completely pushed in. A6E6916W005 End Of Sie P39 P
Related documents
Mazda LF Technical data
Mazda 2006 MAZDA6 Specifications
209I/B - TechPlus
User Guide - MAZDA lab
SAFETY - RotaryHeads.com
Saturn Saturn ASTRA Specifications
ELECTRICAL SYSTEM SECTION EL
To read codes - De Anza College
Asian Import Vehicle Communication Software Manual - Snap-on
Ford FCS-14000-DL GPS Receiver User Manual
0147A Ford DTC Reader Manual & Codes
P L R L F 0001r00 Relazione tecnica