Download Zenith VRL4170 Specifications

A
WARNING:
TO REDUCE
THE RISK OF ELECTRIC
REMOVE COVER
PARTS
INSIDE.
PERSONNEL.
SHOCK DO NOT
(OR BACK). NO USER SERVICEAE;LE
REFER
TO QUALIFIED
SERVICE
TO PREVENT
FIRE OR SHOCK HAZARDS,
DO
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
A
NOT
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsul_tted
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shc_: to
persons.
A
Safety
The exclamation
point within an equilateral triangle is intende,:l to
alert the user to the presence of important
maintenance
(servicing)
instructions
in
accompanying the appliance.
Tips
REGULATORY
Refer to the "Safety Tips" booklet that came with your
product for important safety considerations.
generates, uses and can radiate radio frequency, energy
and, if not installed and used in accordanct: with the in-
provides guidelines for proper grounding and, in partitular, specifies that the cable ground shall be conneeted to the grounding system of the building, as dose
to the point of the cable entry as practical.
structious, may cause harmful interference to radio communicatious. However, there is no guarantee that
interference will not occur in a particular ktstallation. If
this equipment does cause harmful interference, to radio
Power-Cord Polarization
This product is equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the
other.) This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
plug by altering it in any way.
or television :reception, whiich can be detertained by turnhag the equipment off and on, the user is encouraged to
try to correct the interference
lowing measures:
TO PRI_VENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION
POUR _VITER LES CHOCS ]_.LECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA
FICHE D,MqS LA BORNE CORRESPONDANTE
DE
ET POUSSER
JUSQU'AU
f_....Z'--L*
Reorient
or relocate the receiving antenna.
•
Increase the separation
and receiver.
•
Connect the equipment into an oufltet on a circuit
different from that to which the receiver is
connected.
•
Consult the dealer or an experienced
technidan for help.
"P._.%lL
_'1^--*----:--
between
the equipment
radio/TV
CAUTION: Do not attempt to modify this product in any
way without written anthorizzttion from Zenith
Electronics Corporation. Un:mthorized modification
could void the user's authority to operate rids product.
FOND.
€'_
by one or more of the fol-
•
CAUTION
LA PRISE
INFOFIMATION
This equipment has been tested and found to comply
with the limits for a Class B d_gital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harnfftd interference in a residential inslatLation. This equipment
Note to Cable TV System
Installer
This reminder is provided to call the cable 'IV system
installer's attention to Article 820-40 of the NEC that
purpose of the polarized
operating and
the
lkerature
t-_ .....
"_
4_