Download RELM RMU800A User manual
Transcript
If this feature is activated, enter a preset DTMF number (16 digits maximum) in receive mode, then press the [PTT] key to place the call. The DTMF number scrolls across the LCD display as it is entered, and its corresponding audible tone sounds. Notes: ? If you enter a wrong digit or decide not to dial the number, press any key other than the power switch on the front panel to exit. ? The [D] key can be programmed by your dealer as a null tone. This also means that “D” tone is not transmitted when “D” is entered. Instead, “D” is used for a pause time (programmable by your dealer). ? Dial Speed Your dealer can select dial speed at 6, 8, 10 or 15 digits per second. This is designed to reduce false decoder operation by providing a fixed time period between digits. Default: 10 digits per second ? Store DTMF Numbers You can store DTMF numbers (16 digits maximum) in each of the 32 Auto Dial memory locations (01~ 32). 1. Press the [#] key, “D----------” appears on the LCD. 2. Enter the DTMF number (16 digits maximum). You can enter the digits 0-9, A-F. To enter A,B,C,D,E,F, hold down the [PTT] key, then enter 2, 5, 8, 0, *, # respectively. 3. Press the [#] key, “------” appears on the LCD indicating the memory location. 4. Enter the desired memory location number (01~ 32). 5. Press the [#] key again to store the DTMF number into the memory location. If you enter a wrong digit or decide not to dial the number, press any key other than the power switch on the front panel to exit. ? Confirm Stored DTMF Numbers 1. Press the [*] key, “A---” appears on the LCD. 2. Enter the desired memory location number (01~ 32). The stored DTMF number or caller ID is displayed on the LCD. Press any key other than the [PTT] key, the original display is restored. ? Dial Stored DTMF Numbers 1. Press the [*] key, “A---” appears on the LCD. 2. Enter the desired memory location number (01~ 32). The stored DTMF number or caller ID is displayed on the LCD. 3. Press the [PTT] key to place the call. ? Clear Stored DTMF Numbers 1. Press the [#] key, “D----------” appears on the LCD. 2. Press the [#] key again, “D Clear” appears on the LCD. 3. Enter the desired memory location number (01~ 32). 21