Download Quadro Quadro16xi Installation guide

Quadro Manual II: Administrator's Guide
Appendix: System Default Values
Parameter
System Default Value
Extension Settings – SIP Advanced
Authentication User Name – undefined,
Send Keep-alive Messages to Proxy – disabled,
RTP Priority Level – medium,
Do Not Use SIP Old Hold Method – disabled,
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP
Server – undefined,
Port for Secondary SIP Server – 5060.
Extension Settings – Remote
Remote Extension – disabled.
Extension Settings – Call Queue
Call Queue – disabled.
Extension Settings – Voice Mailbox
(for Quadro2x models)
Internal Voice Mail for all extensions except 12.
Configuration Wizard Status – activated,
Voice Mailbox Access List – undefined,
Extension 12 – Disabled Voice Mail,
Voice Mailbox Access List – empty.
Extension Settings – Voice Mailbox
(for Quadro4x and Quadro16x models)
Internal Voice Mail for all extensions except 14.
Configuration Wizard Status – activated,
Voice Mailbox Access List – undefined,
Extension 14 – Disabled Voice Mail,
Voice Mailbox Access List – empty.
Extension Settings – Codecs
(for Quadro2x models)
Codecs for FXS lines - G711u (preferred), G711a, G729a, G726/32, G726/16,
G726/24, G726/40– enabled, iLBC, G.722, G.722.1, TDVC, H.263, H.263+, H.264 –
disabled,
Codecs for IP lines - G711u (preferred), G711a, G729a– enabled, G726/32,
G726/16, G726/24, G726/40, iLBC, G.722, G.722.1, TDVC, H.263, H.263+ and
H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled only on extension 12.
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
Secure RTP Settings – Make Unsecure Calls, accept anything.
Extension Settings – Codecs
(for Quadro4x and Quadro16x models)
Codecs for FXS lines - G711u (preferred), G711a, G729a, G726/32, G726/16,
G726/24, G726/40– enabled, G.722, G.722.1, TDVC, H.263, H.263+, H.264 –
disabled,
Codecs for IP lines - G711u (preferred), G711a, G729a– enabled, G726/32,
G726/16, G726/24, G726/40, iLBC, G.722, G.722.1, TDVC, H.263, H.263+, and
H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled.
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
Secure RTP Settings – Make Unsecure Calls, accept anything.
Attendant 00 Settings – General
(for Quadro2x models)
Display name – Attendant,
FAX forwarding – enabled, Extension to forward – 12,
Show on Public Directory – enabled,
Percentage of System Memory – 1%.
Attendant 00 Settings – General
(for Quadro4x and Quadro16x models)
Display name – Attendant,
FAX forwarding – enabled, Extension to forward – 14,
Show on Public Directory – enabled,
Percentage of System Memory – 1%.
Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x)
142