Download Quadro Quadro16xi Installation guide
Transcript
Quadro Manual II: Administrator's Guide Administrator’s Menus Administrator’s Menus System Menu Fig. II-1: System Menu in Dynamo theme Fig. II-2: System Menu in Plain theme System Configuration Wizard The System Configuration Wizard allows the administrator to define the Quadro’s Local Area Network settings and to specify regional configuration settings to make Quadro operational in its LAN. The System Configuration Wizard MUST be run upon Quadro's first startup to make sure that it works properly in its network environment. The Wizard allows navigating through the following basic configuration parameters and settings: • • • • System Configuration (see below) DHCP Settings for the LAN Interface Regional Settings and Preferences (see below) Emergency Codes and PSTN Access Codes Settings (see below) DHCP Settings for the LAN are described in the chapters below. The LAN configuration and regional settings will be described later in this chapter. Please Note: It is strongly recommended to leave the factory default settings if their meanings are not fully clear to the administrator. Fig. II-3: System Configuration Wizard - Start page Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 7