Download Multitech TA410 User guide

Chapter 5: Technical Configuration
situation. This may not be the same as your selection for the Country/Region field. The selections in the
Country Selection for Built-In Modem field entail more detailed groupings of telephony parameters
than do the Country/Region values.
In each field, enter the values that fit your particular system.
The Regional Parameters fields are described in the table below.
“Regional Parameter” Definitions
Description
Field Name
Values
Country/
Region
USA, Japan, UK,
Custom
Multi-Tech Systems, Inc.
Name of a country or region that uses a certain set of tone pairs for
dial tone, ring tone, busy tone, unobtainable tone (fast busy tone),
survivability tone (tone heard briefly, 2 seconds, after going offhook
denoting survivable mode of VOIP unit), re-order tone (a tone
pattern indicating the need for the user to hang up the phone), and
intercept tone (a tone that warns an a party that has gone off hook
but has not begun dialing, within a prescribed time, that an
automatic emergency or attendant number will be called; the
automatic call can be used to direct an attendant’s attention to a
disabled or distressed caller, allowing an appropriate response to be
made).
In some cases, the tone-pair scheme denoted by a country name
may also be used outside of that country. The “Custom” option
(button) assures that any tone-pairing scheme worldwide can be
accommodated.
Note: Intercept tone is applicable only when the FXS telephony
interface has been chosen in the Interface screen and when the
AutoCall / OffHook Alert field is set to OffHook Alert in the
Voice/Fax Parameters screen. The time allowed for dialing before
the automatic calling process begins is set in the Offhook Alert
Timer field of the Voice/Fax Parameters screen.
TalkAnyTime User Guide
89