Download Zhone IMA CS-200 System Specifications

Running
Head
Test,
Debug,
Backup, & Restore
3.8
Model No.
System Configuration and Operation
Test, Debug, Backup, & Restore
Advanced configuration and diagnostics are available through the use of the sYs (sYstem)
command from the System Main Screen. Pressing “y” brings up the Test and Debug screen
shown in Figure 3-12.
Test and Debug
Zip | Debug | Reg | Backup | rEstore | Main
Figure 3-12. System Test and Debug Screen
3.8.1
Backing Up the System to a File
The Backup procedure allows users to save the configuration parameters for all or some cards,
as well as the installation table, cross-connects, alarm filters, and alarm history. This
information can then be used with the Restore command (see below) to restore the parameter
data to certain cards or to the whole system. Figure 3-13 shows a sample of the Backup screen.
(The Restore screen is nearly identical to this.)
3-22
Reference Guide