Download ETS 4 Operating instructions

Transcript
WAGO-Software
WAGO ETS Plug-in
KNX/EIB/TP1 Module / KNX IP Controller Parameterization
Figure 23: Selection of EIS type EIS 5, corresponds to DPT_Value_Temp
Figure 24: Selection of EIB datawidth 2 byte, also contains DPT_Value_Temp
Only one attribute (data type/datawidth) can be used as a filter!
Only one attribute can be entered as a filter.
Multiple selection in the EIB datatype window is not possible.
Manual
2.0.0
35