Download VXI B10 User manual

Index
VXI-MXI-2/B
Change Factory Configuration
switch, 4-14
jumper and switch settings,
4-14 to 4-15
Restore Factory Configuration
switch, 4-14
electrical specifications, A-5
electronic support, H-1 to H-2
electrostatic discharge, damage from
(warning)
VXI-MXI-2, 3-1
VXI-MXI-2/B, 4-1
e-mail support, H-2
ENABLE bit, 5-56
environmental specifications
B-size VXI-MXI-2, A-3
C-size VXI-MXI-2, A-3
equipment, optional, 1-5 to 1-6
ERROR bit, 5-83
ETOEN bit, D-5
ETRIG bit, D-5
ETRIG[1:0] bits, 5-36
Extender A16 Window Register (VWR1),
5-14 to 5-15
Extender A24 Window Register (VWR2),
5-16 to 5-17
Extender A32 Window Register (VWR3),
5-18 to 5-19
Extender Logical Address Window Register
(VWR0), 5-12 to 5-13
external clock connector, C-6 to C-7
EXT CLK connector (figure), C-6
EXT CLK signal characteristics
(table), C-7
fair requester
MXIbus, 7-12, B-9
VMEbus, B-7
VXIbus, 7-9
fax and telephone support, H-2
FaxBack support, H-2
FCR[7:0] bits, 5-85
FRESET bit, 5-66
front panel of VXI-MXI-2, C-1 to C-8
external clock connector, C-6 to C-7
EXT CLK connector (figure), C-6
EXT CLK signal characteristics
(table), C-7
features, 1-5
layout
VXI-MXI-2 (figure), C-2
VXI-MXI-2/B (figure), C-3
MXI-2 connector (figure), C-4
MXI-2 connector signal assignments
(table), C-4 to C-5
MXIbus signal characteristics
(table), C-6
trigger input connector, C-8
TRG IN connector (figure), C-8
TRG IN signal characteristics
(table), C-8
trigger output connector, C-7
TRG OUT (figure), C-7
TRG OUT signal characteristics
(table), C-7
FTP support, H-1
H
hard reset of registers, 5-1, D-5
high/low configuration format, 6-5
F
I
FAIR bit
Shared MXIbus Status/Control Register
(SMSR/SMCR), 5-62
VXI-MXI-2 Status Register
(VMSR), 5-28
© National Instruments Corporation
I1[15:0] bits, 5-43
I2[31:0] bits, 5-44
I3[15:0] bits, 5-45
I4[31:0] bits, 5-46
I5[15:0] bits, 5-47
I6[31:0] bits, 5-48
Index -7
VXI-MXI-2 User Manual