Download Quectel L80 EVB Specifications
Transcript
M95 Hardware Design To avoid possible cross-talk from the SIM_CLK signal to the SIM_DATA signal be careful that both traces are not placed closely next to each other. The traces of SIM_CLK, SIM_DATA and SIM_RST are recommended to be around with GND independently. All signals of SIM interface should be protected against ESD with a TVS diode array. It is recommended to add TVS diode such as WILL (http://www.willsemi.com) ESDA6V8AV6. The parasitic capacitance of TVS diode is less than 50pF. The 22Ω resistors should be added in series between the module and the SIM card so as to suppress the EMI spurious transmission and enhance the ESD protection. All the peripheral components are recommended to place near the SIM card holder. 3.10.2. 6 Pin SIM cassette l e t l c a i e t u n Q ide f n o C For 6-pin SIM card holder, it is recommended to use Amphenol C707 10M006 512 2. Please visit http://www.amphenol.com for more information. Figure 31: Amphenol C707 10M006 512 2 SIM card holder Table 16: Pin description of Amphenol SIM card holder Name Pin Function SIM_VDD C1 SIM Card Power Supply SIM_RST C2 SIM Card Reset SIM_CLK C3 SIM Card Clock GND C5 Ground M95_HD_V1.0 - 54 -