Download washer

Troubleshooting
Try these troubleshooting
tips before making a service call. You may save time and money!
Washer Symptom
Possible
Won't Fill
Make sure
Make sure
Make sure
Press and
Make sure
Make sure
Check the
Cause / Solution
power cord is plugged all the way into the electrical outlet.
hot and cold water faucets are turned on.
that the fill hoses are not kinked or twisted.
hold the start button for two seconds to start washer.
that the controls are properly set.
that the loading door is closed tightly.
house fuse or circuit breaker.
Clean the screens inthe water mixing valve and the filter screens located at the faucet end
of the fill hoses. (Owner is responsible for service calls regarding cleaning of the screens.)
Won't start
,
Make sure loading ctoo_iS Closed t ghtiy;
Pressand hold start button for two seconds tO start
Washer.
Make sure power cord Jsplugged all the way into the electrical outlet.
,
•
Won't Spin/Tumble
Make sure
cycle selecto
knob isbreaker.
nOt set to ;he OFF position.
Check
the house
fuse or rCircuit
Make sure door latch is properly adjusted relative to door lock.
Make sure loading door is closed tightly.
Press and hold the start button for two seconds to start
washer.
Make sure power cord is plugged all the way into the electrical outlet.
Make sure controls are properly set.
Check the house fuse or circuit breaker.
Broken drive belt. Call the service person.
Foreign object trap in pump may be clogged. Clean the trap. Refer to M3inten3nce section.
S_0ps!Pauses Du_!mgCycle'
Pauses are pa_t of the washer,s _ormal 0perati0n.
Wash !0adSeVerely
may be unbalanced;
Washer
w!!lse
StOpeCtO
andk.o
thentooFF
restart aspin
automatically:
washer,s
UnUance
turncycle
nd
red,s.,
ute
theIfthe
oa*....
•
Won't Drain
Check the house fuse or circuit breaker.
Make sure drain hose is not kinked or twisted.
Make sure drain hose is not clogged.
Make sure drain receptacle is not clogged.
Refer to the installation instructions to make sure that the drain hose has been properly
installed.
Foreign object trap in pump may be clogged. Clean the trap. Refer to M3inten3nce section.
Wate_ Leaks
;
Valvel
CheCkthe condition ofthe
fill hoses; ReplaCe fill hoses every fiveyea_s
Make sure drain _eCeptacle iS not CloggecL
Check house plumbing.
,
Laundry load may be oyersudsing or o_erloadecl Makesureyouareus!nglow-sudsing.
eff!c!e_y (HE) detergent and p_oper !oad sizes;
,Make
sure outs!de perimeter of the door g!ass where seal Contacts glass !s dean.
'
high
(continued)
-21 802756
@Copyright, Alliance Laundry Systems LLC--DONOTCOPYor TRANSMIT