Download Christie PowerTool User manual

Introduction
Wireless Network Hardware Requirements
•
1 wireless network hub
•
1 wireless-enabled computer
•
1 Ethernet cable for each projector
Sample Wireless Network Topology
Install the PowerTool Software
1. Insert the PowerTool installation CD in the CD-ROM drive of the computer you will use to manage
your projectors.
If the installation wizard does not start:
a. Click Start.
b. Enter Run in the Search programs and files field.
c. Click Run below Programs.
d. Enter <CD-ROM Drive Letter>\AutoRun.exe. For example, D:\AutoRun.exe.
e. Click OK.
2. Complete the installation wizard.
3. Click Finish when the software is installed.
Start the PowerTool Software
Click Start > All Programs >Christie > PowerTool 3.1 > PowerTool 3.1.
2
Christie PowerTool 3.1 User Manual
020-100035-04 Rev. 1 (02-2014)