Download New Feature Update

Fret Select (cont.)
Setting Synth Sounds via Fret Select
1. Press and hold the SYNTH button on the control panel.
2. Press a single fret to select the corresponding preset. The presets are arranged on
the fretboard numerically, starting from 1 at the first fret of the lowest string and
ascending up the neck. The next string begins at 21, the next at 41, and so forth.
The numbers wrap once the maximum synth sound has been reached.
3. Release the SYNTH button.
Setting Backing Tracks via Fret Select
1. Press and hold the TRACK button on the control panel.
2. Press a single fret to select the corresponding preset. The presets are arranged on
the fretboard numerically, starting from 1 at the first fret of the lowest string and
ascending up the neck. The next string begins at 21, the next at 41, and so forth.
The numbers wrap once the maximum synth sound has been reached.
3. Release the TRACK button.
Checking Firmware/Librarian/Preset versions
and Battery Life
1. Press and hold the MUSIC button on the control panel.
2. The LED display will show C=xxxx L=yyyy, P=zzzz where C=the currently
installed firmware version, L=the currently installed librarian, and P=the
currently installed preset version.
3. Additionally, the orange string indicators at the bottom of the LED display will
light up. The fewer that light, the closer to dead your batteries are.
6
YRG 1000-UG01