Download Siemens ERTEC EB 200 Technical data

RELD_PREDIV
Description
Bit No.
7:0
15:8
31-16
Name
Prediv [7:0]
Prediv [15:8]
Reserved
TIM0
TIM1
Bit No.
31:19
18
Name
Timer [31:0]
Name
Reserved
Timer_Mode
16
Run/xStop
Addr.: 0x4000_2020
Default: 0x0000_0000
Description
Reserved
0: Cyclic
1: Retrigger via UART_RXD signal (for RXD at log. '0')
0: Cycle timer: Timer 2 is loaded with 0000h when timer value = reload value
and continues to run
1: OneShot-Timer: Timer 2 stops when timer value = reload value
0: Stop Timer 2, reset Timer 2, deactivate INT
1: Start Timer 2
Reload value of Timers 2
Reload [15:0]
TIM2
Bit No.
31:16
15:0
Default: 0x0000_0000
Default: 0x0000_0000
Description
Current value of the timer
R/W
OneShot_Mode
Description
Addr.: 0x4000_2018
Addr.: 0x4000_201C
Timer 2 Control Register
17
15:0
Default: 0x0000_0000
Timer Register 0-1. Values of timers 0-1.
TIM2_CTRL
Description
Addr.: 0x4000_2014
Description
Reload value of prescaler 0
Reload value of prescaler 1
Not relevant (read=0)
R
R
Description
Bit No.
31:0
R/W
Reload register for the two prescalers
R
Addr.: 0x4000_2024
Default: 0x0000_0000
Timer Register 2. Values of Timer 2.
Name
Reserved
Timer [15:0]
Description
Reserved
Current value of Timer 2
Copyright © Siemens AG 2007. All rights reserved.
Technical data subject to change
42
ERTEC 200 Manual
Version 1.1.0