Download Belkin F5U005EPORT User`s guide

This message usually means that the database driver is incorrectly installed. First follow the
instructions in FAQ #G010 to fix this.
If the message still appears, use the following procedure to repair the installation:
1. Right-click the Start button on the taskbar and select Explore from the popup menu.
2. In Explorer, browse to the folder C:\3DEmbroidery\System.
This assumes you have installed your 3D Embroidery System software in the default
location of C:\3DEmbroidery. If you have installed the software in a different location,
browse to the System folder at that location.
3. Delete the file named "SystemMotifs.mdb".
The file name may simply be shown as "SystemMotifs".
4. Put your 3D Embroidery System software CD in your computer to re-run the installation.
The installation should start automatically when you put your software CD in the
computer. If this does not happen, browse to the CD with Explorer and double-click
"Setup.exe" to start the installation.
5. When the choice appears, select the "Modify or remove" option and click Next.
6. In the next screen, select Repair and click Next.
7. Continue with the installation and follow the on-screen instructions. When the installation
is complete, the motifs will be restored.
G009 Error "Unable to locate Myfills.mdb."
This message usually means that the database driver is incorrectly installed. First follow the
instructions in FAQ #G010 to fix this.
If the message still appears and you had previously backed up your MyFills, use the Restore
MyFills option in 3D Digitizing to restore your MyFills database. See the on-line help in 3D
Digitizing for more information.
If the message still appears, use the following procedure to repair the installation:
1. Right-click the Start button on the taskbar and select Explore from the popup menu.
2. In Explorer, browse to the folder C:\3DEmbroidery\System.
This assumes you have installed your 3D Embroidery System software in the default
location of C:\3DEmbroidery. If you have installed the software in a different location,
browse to the System folder at that location.
3. Delete the file named "MyFills.mdb".
The file name may simply be shown as "MyFills".
4. Put your 3D Embroidery System software CD in your computer to re-run the installation.
The installation should start automatically when you put your software CD in the
computer. If this does not happen, browse to the CD with Explorer and double-click
"Setup.exe" to start the installation.
5. When the choice appears, select the "Modify or remove" option and click Next.
6. In the next screen, select Repair and click Next.
7. Continue with the installation and follow the on-screen instructions.
When the installation is complete, the MyFills database will be restored to its original
installation state. This means that the MyFills database will be empty. If you had any MyFills,
you will need to import them again.
G010 How do I fix the database driver used by my 3D Embroidery System
software?
Database drivers are normally found installed on most computers – they are commonly
installed as part of the installation of Microsoft® Office or as an upgrade of key components
of the operating system.