Download Cooline DWL SERIES User`s guide

Detailed procedures
Use the following procedures to retrieve the settings of one InRow RC and export them
to one or more InRow RCs.
Retrieving. To set up and retrieve an .ini file to export:
InRow RC ACRC100 Series
USER’S GUIDE
1. Configure the InRow RC with the settings you want to export.
To avoid errors, configure the InRow RC by using its user
interface whenever possible. Directly editing the .ini file risks
introducing errors.
2. Use FTP to retrieve the file config.ini from the InRow RC you configured:
a. Open a connection to the InRow RC, using its IP address. For example:
ftp> open 158.165.2.132
b. Log on, using the Administrator user name and password configured for the
InRow RC.
c. Retrieve the config.ini file containing the InRow RC’s current settings:
ftp> get config.ini
The file is written to the folder from which you launched FTP.
To create batch files and use an APC utility to retrieve configuration
settings from multiple InRow RCs and export them to other InRow
RCs, see Release Notes: ini File Utility, version 1.0 on the Utility CD.
Customizing. You must customize the file to change at least the TCP/IP settings
before you export it. Use a text editor to customize the file.
– Section headings, keywords, and pre-defined values are not case-sensitive, but
string values that you define are case-sensitive.
– Use adjacent quotation marks to indicate no value. For example, LinkURL1=""
indicates that the URL is intentionally undefined.
– To define values, opening and closing quotation marks are optional, except to
enclose values that contain leading or trailing spaces or values which are already
82