Download MIMAKI TS5-1600AMF Specifications

Test Draw Arrange
You can select the deployment direction of the test pattern to be printed when performing test printing
repeatedly.
Set value : [FEED DIR. , SCAN DIR.]
: When the set value is “FEED DIR.”
: When the set value is “SCAN DIR.”
Detection of media
Thickness Detection
Set whether to perform automatically or manually the detection of media thickness performed prior to the
detection of media width.
Even the same media is used, the thickness could be different due to detection error. In such instance, if
you make the setting to MANUAL you can always set the same thickness.
Set value: [AUTO, MANUAL]
FEED Error Detection
If ERROR 135 is displayed when NORMAL is set in FEED METHOD and the media still remains, set OFF.
Set value: [ON, OFF]
MACHINE NAME
When the printer is connected through the USB 2.0 interface to a system to which two or more machines
are connected, set the identifier of the printer to have the system recognize it.
As a machine name, enter only the printer number in the form [TS5 - ∗∗ (printer number) ].
Available setting values: [01 ~ 99] ( Default: 01)
6-25