Download Sharp LC-37HV4U Operating instructions
Transcript
Using external equipment Use the PC terminals to connect a PC. • The PC input terminals are DDC1/2B_compatible. • Refer to page 77 for a list of PC signals compatible with the System. AVC System (front view) --o q m RGB cable commercially available) PC 3.5 mm stereo minijack cable sommercially available) Signal names for 15-pin mini D-sub connecter Pin No. (_ Signal name Pin No. Signal name Pin No, Signal name R _) GND (Ground) @ Not connected G (_ GND (Ground) @ SDA B @ GNU (Ground) _3_ HD Not connected (_) CSYNC (_ • Macintosh adaptor may be required for use for some Macintosh + 5V GNU (Ground) _ VD _5_ SCL computers. To view an image from a PC, select "PC" from the "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 50.) When connecting to a PC, the correct input signal type is automatically detected. If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment on the "Auto Sync." in the "Setup" menu. (See page 49.) You only need to select the input source on the "INPUT SOURCE" menu. • Each time INPUT is pressed, _) -46 the input source toggles.