Download CPS US-480 Technical data

This function will not respond when the inverter is
in operation mode and a “FaultOperated” alarm
interface will be indicated.
(3) “3 Recover” menu, the manufacturer’s parameter
default value can be restored when the inverter is not in
operation mode. Otherwise, a “FaultOperated” will be
prompted.
(4) In “4 ClrErrRecd” menu, history information of the
faults can be cleared. A confirmation is required to clear the
records.
GridV.Max（V）
→ 528
GridVmaxTripT (S)
1.80
GridV.Min（V）
→ 422
GridVminTripT (S)
1.80
→1 SysPara.
2 Restart
3 Recover
4 ClrErrRecd
Pls Input Pwd
****
Are You Sure？
Are You Sure？
PwdError
Pls Input Again
GridF.Min(Hz)
→ 59.30
GridFTripT (S)
0.08
Restarting...
Success!
Recovering..
FaultOperated
Failure!
Success！
Are You Sure?
FaultOperated
Failure！
Sucess!
Figure 5-12 System parameter setup
50
Chapter 5
Human Machine Interface