Download EDNord magicolor 7300 User manual

The illustration shows the internal
Color Management Module of a
KONICA MINOLTA color laser printer. First,
the RGB Source ICC profile translates RGB
values of the color producing device (in this
case a monitor) to the standard CIE LAB
color model. Next, those CIE LAB model
values are translated into a Simulation
profile, if the user chooses to use one.
If a Simulation profile is used, the color
data is once again translated to the
standard CIE LAB color model. Finally, the
KONICA MINOLTA Output or Destination
profile converts the translated data into
CMYK to be sent to the print engine.
Several RGB Source, and Destination ICC
profiles are integrated into the Color
Management Module of KONICA MINOLTA
color laser printers. You may also download
other Source, Simulation, and Destination
ICC profiles.
A primary function of the internal Color
Management Module is to map
out-of-gamut colors to the closest in-gamut
color.
Downloading and Working with
Custom ICC Profiles
Requirements
! magicolor 7300 printer
! Internal hard disk
! Download Manager
! ICC profile
"#
KONICA MINOLTA does not provide
software or instructions to create
new ICC profiles, but does provide
the instructions to replace or add to
the resident ICC profiles.
The host and simulation profiles are
on the Software Utilities CD-ROM.
Color Profiles
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
169