Download Audio Research CD6 User guide

Transcript
Operation
Power-up Procedure
Once plugged into the power receptacle, push the front panel Power switch
to turn on the CD6. The central green front panel power LED will glow dimly
for about a 40 second circuit warm-up interval with the output automatically
muted. When the LED glows brightly, the CD6 is ready for operation.
Once powered up and operational, with the CD door fully closed, the unit
will default to the operate setting (display, transport and front panel controls
are activated). The CD6 reaches its full sonic potential from “cold” in a
reasonably short time period. it’s recommended that it be powered off for
any extended time it is not in use.
Shut-Down
Set preamplifier Mute switch to “Mute” position.
Press CD6 front panel Power switch to turn unit off.
9