1
Download Enterasys Matrix E1 1H582-25 Specifications
Transcript
SNMP Command Set Configuring SNMP Notification Parameters 5.2.7 Configuring SNMP Notification Parameters Purpose To configure SNMP notification parameters and optional filters. Notifications are entities which handle the generation of SNMP v1 and v2 “traps” or SNMP v3 “informs” messages to select management targets. Optional notification filters identify which targets should not receive notifications. For a sample SNMP trap configuration showing how SNMP notification parameters are associated with security and authorization criteria (target parameters) and mapped to a management target address, refer to Section 5.2.8. Commands The commands needed to configure SNMP notification parameters and filters are listed below and described in the associated section as shown. • show trap (Section 5.2.7.1) • set trap (Section 5.2.7.2) • clear trap (Section 5.2.7.3) • show newaddrtrap (Section 5.2.7.4) • set newaddrtrap (Section 5.2.7.5) • show snmp notify (Section 5.2.7.6) • set snmp notify (Section 5.2.7.7) • clear snmp notify (Section 5.2.7.8) • show snmp notifyfilter (Section 5.2.7.9) • set snmp notifyfilter (Section 5.2.7.10) • clear snmp notifyfilter (Section 5.2.7.11) • show snmp notifyprofile (Section 5.2.7.12) • set snmp notifyprofile (Section 5.2.7.13) • clear snmp notifyprofile (Section 5.2.7.14) Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-57
