Download Axis 5500 User`s guide

AXIS 5500/AXIS 5550 User’s Guide
4
Before You Start
The instructions in this guide apply to:
AXIS 5500
AXIS 5550
with firmware version 6.40 (and higher).
The following operating systems are covered in this guide:
• Windows (98, Me, NT, 2000, XP)
• Mac OS X
• UNIX/Linux
The instructions in this guide are based on the settings found in a new and
unconfigured AXIS 5500/AXIS 5550.
To reload the default parameters, you can perform a Factory Default, which will restore most
settings to default values. See The Test Button on page 29 for instructions.
Note:
Installation instructions in this book cover the above operating systems over TCP/IP. For installation
instructions for Windows over NetBIOS/NetBEUI, NetWare over IPX/SPX and IP, and older versions of
Macintosh, as well as instructions on setting an IP address using RARP and BOOTP, see the AXIS 5500/AXIS
5550 User’s Manual, located on the AXIS Network Product CD (version 1.3 or later) and www.axis.com