Download ProForm 7.2c Specifications

JiaXing Jarol Scientific Instrument Co.,Ltd－JR6000 series products
code
exceeds the communication overtime, the system
will report “communication faults” (CE).
Response
FC.06
Generally, set it as invalid; set the parameter in
the continuous communication to monitor the
Unit’s place of LED
communication state.
0: Response to writing
Function
code
Name
1: No response to writing
Setting range
Ten’s place of LED
Communicati
FC.05
0: Reference not saved when power off
1: Reference saved when power off
0~3【1】
on error
Fd Group
Function
action
0: When communication error occurs, inverter will
Function
alarm (CE) and coast to stop.
code
1: When communication error occurs, inverter will
Fd.00~
omit the error and continue to run.
inverter will not alarm but stop according to stop
Name
Setting range
Reserved
FE Group Factory Setting
mode determined by F1.06. Otherwise it will omit
This group is the factory-set parameter
group. It is prohibited for user to modify.
the error.
3: When communication error occurs, inverter will
not alarm but stop according to stop mode
determined by F1.06.
Name
Supplementary
Fd.09
2: When communication error occurs, if F0.01=2,
Function
00~11【00】
action
Setting range
106