Download ProForm 7.2c Specifications

JAROL Assumes the promotion of energy-saving technology as its own task!
Function
code
Name
S3 terminal
F5.03
Setting range
F5.04
Jog forward
5
Jog reverse
0~39【7】
function
S4 terminal
4
6
0~39【0】
function
7
Function
code
Name
Setting range
S5 terminal
0~39【0】
F5.05
function
8
S6 terminal
0~39【0】
F5.06
function
S7 terminal
0~39【0】
F5.07
function
9
HDI terminal
0~39【0】
F5.08
function
0
1
Invalid
Forward
2
Reverse
3
3-wire control
Please set unused
terminals to be
invalid to avoid
malfunction
Please refer to
description of
F5.10.
Please refer to
description of
F8.06~F8.08.
The inverter blocks
the output
immediately. The
Coast to stop
motor coasts to
stop by its
mechanical inertia.
Resets faults that
have occurred. It
Reset fault
has the same
function as
STOP/RST.
When this terminal
takes effect,
inverter
decelerates to stop
and save current
status, such as
Pause running
PLC, traverse
frequency and
PID. When this
terminal takes no
effect, inverter
restores the status
Stop the inverter
and output an
External
fault
alarm when a fault
input
occurs in a
peripheral device.
10：Up command（UP）
11：DOWN command（DOWN）
12：Clear UP/DOWN
The reference frequency of inverter can be
adjusted by UP command and DOWN command.
Please refer to
description of
F5.10.
These three functions are used to modify the
69