Download Colortran I 48 Specifications
Transcript
REFERENCE MANUAL -L(LEVELS) Location: [S4] in STAGE and PATCH In the STAGE display, pressing the (LEVELS) soft key will change the display to show the output levels of the dimmers. In place of the White and Gray channel numbers are RED dimmer numbers and the current output levels. Additionally, it is possible to address a dimmer or groups of dimmers directly from this screen. & EXAMPLE: To access Direct Dimmer Control in the Stage LEVELS sub display: [DIMMER] [#] [ENTER] (Use the wheel to set the level.) - or [DIMMER] [#] [AT] [level] [ENTER] RELATED T OPICS: [DIMMER] In the PATCH display the (LEVELS) soft key is used to change the PATCH display from the proportional patch to the profile display. When pressed the value of this key changes to (PROFIL) RELATED T OPICS: (PROFIL) (LINEAR) Location: [S2] in PATCH alternate value (PORT) The Patch display of the MC 24/48 may be viewed with the dimmers numbers in a linear fashion (consecutive 1 through.. ##) or they may be viewed by dimmer port. When the (LINEAR) soft key is pressed, the dimmer numbers are arranged consecutively and the value of the soft key changes to (PORT). RELATED T OPICS: (PORT) [LINK] NSI CORPORATION MC 24/48 Version 1.03 20