Download CycleOps Phantom series User guide

CHAPTER 2: UNPACKING THE CYCLEOPS PRO SERIES INDOOR CYCLE
Place the box upright and cut the plastic binding straps. Lift the top of the box to expose the indoor cycle and packaging.
Remove all parts from the box including foam inserts. Ensure all the following parts are included:
Name
Quantity
A
Rear stabilizer
1
B
Front stabilizer
1
C
Main frame assembly
1
D
Handlebar post (shorter, reads to
18”)
1
E
Seat post (longer, reads to 23”)
1
F
Seat
1
G
Seat post clamp
1
H
Handlebar
1
I
Water bottle holder
1
J
End caps
2
K
End cap screws
4
L
Water bottle spacer
1
M
Large L handles
2
N
Small L handles
2
O
Stabilizer bolts
8
P
Stabilizer washers
8
Q
Multi-purpose wrench
1
R
6mm Allen wrench w/Phillips
screwdriver end
1
S
5mm Allen wrench
1
T
4mm Allen wrench
1
U
3mm Allen wrench
1
Additional tools that may be helpful:
-Vice Grips or small clamping tool
-17mm Cone wrench
-15mm box wrench
-10mm box wrench
-Pliers
-Pedal wrench
-2.5mm Allen wrench
Rear stabilizer
A
Handlebar
post
D
Front stabilizer
Seat post
B
E
Main frame assembly
C
Seat
F
Water bottle
holder
I
23”
18”
Seat post
clamp
G
End
caps
J
End cap screws
Large L Handles
M
Small L Handles
Stabilizer bolts
O
Handlebar
Stabilizer washers
6mm Allen wrench w/
Phillips screwdriver end
5mm Allen wrench
4mm Allen wrench
3mm Allen wrench
H
K
Water bottle
spacer
L
Multi-purpose
wrench
Q
N
P
R
S
T
U
2