Download Datalogic POWERSCAN PBT7100 guide Programming instructions

Bluetooth Features
Non-Automatic Updates
Use the following special programming bar code labels to perform a
manual, one-time update to devices as listed.
Flash Update to Scanner
Scan this programming bar code to copy the Base Station’s flash memory
to the scanner. Use this method when the Auto Flash Memory Update feature is disabled and you want a one-time flash update to be performed.
Flash Update to Scanner
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration
to the scanner. Use this method when the Auto Configuration Update feature is disabled and you want a one-time configuration update to be performed to the scanner.
Copy Configuration to Scanner
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the
Base Station. Use this method when the Auto Configuration Update feature
is disabled and you want a one-time configuration update to be performed to the Base Station.
Copy Configuration to Base Station
5-4
PowerScan® 7000BT SRI