Download ActionTec PC-260 User`s guide

4
Cards that Require Only
CARDTALK.SYS
The Super Client driver, CARDTALK.SYS controls the interface
between the computer and any PC Card you insert in a PCMCIA
socket. The cards described in this chapter work with CardTalk and the
drivers provided on the distribution diskette without requiring
additional software. These include:
• Fax/modem cards
• Special serial port cards
• ATA devices (rotating media, solid-state cards, such as SunDisk
cards and other solid-state ATA PC Cards)
• SRAM and Flash memory cards
• Read-only memory (ROM) cards
Other PC Cards may require software that is usually provided by the
manufacturer of the card. Chapter 5, Cards that Require Additional
Drivers, discusses using these cards.
Fax/Modem Cards
Originally designed to add communications capability to portable
computers, PC fax/modem cards are also being used with desktop
computers. For example, with a Card Reader installed, you can share a
single fax/modem card between your portable and desktop computers.
The Card Reader has its own speaker, which connect to the speaker
output of the fax/modem card.
This section discusses the operation of PC fax/modem cards when used
with CardTalk in both the MS-DOS and Windows environments.
PC-250, PC-260, and PC-300 User’s Guide
Page 51