Download CAB Apollo 1 Specifications
Transcript
PARKING THE VEHICLE - Always park on flat, even and level ground where there is no risk of falling masses, landslides or flooding. - Lower outriggers to the ground (if present) - Retract the boom completely and lower it to the ground. - Engage the parking brake - Move the “direction” lever to position "N". - Run the engine for a minimum of 60 seconds before switching off in order to cool the engine down. - Turn the key to the halt engine position. - Remove the key from the ignition. - Block the hydraulic controls using the devices provided (when present). - Close and lock windows using the specially provided handles. - Close and lock the cab door. - Place wedges under the wheels. - Make sure that the vehicle is parked so that it does not block traffic and at least 5 metres away from railway tracks. TEMPORARY HALT Gradually release the accelerator pedal. Bring the vehicle to a halt on flat ground. Engage the parking brake Move the “direction” lever to position "N". While the vehicle is being run-in (50 h) do not keep the diesel engine at minimum revs for too long. - ATTENTION IF THE OPERATOR MUST ABANDON THE DRIVER'S SEAT, HE/SHE SHOULD FOLLOW THE INSTRUCTIONS PROVIDED IN THE PARAGRAPH REGARDING "PARKING THE VEHICLE". B/15