Download Cabletron Systems MMAC-Plus 9F116-01 User`s guide

AT-8116 User’s Guide
Finally, the user may press <?> to see the list of commands which
start with the text he has already typed, eg: User pressed <?>
SYS_console>get-c?
?
command 'get-c' not found
SYS_console>get-co?
Table 2-2 Commands Matching <get-c>
get-comm
show current read or/and write community
get-con-matrix
retrieves the VLAN connectivity matrix
get-colls-cnt
gets the collision distribution counters per port
Command Line Interface Structure
The CLI has several categories of commands:
❑
Console related commands: help, banner, console parameters
setup, etc.
❑
System related commands: reset commands, download
commands, initialize the NVRAM with defaults, etc.
❑
IP commands: parameter setup, parameter and information
display, etc.
❑
SNMP agent related commands: parameter setup,
management and traps options
❑
Switching Database related commands: aging time
management and Switching Database entry management
❑
Virtual LAN commands
❑
Port Configuration related commands
❑
Switching statistics commands
❑
Spanning Tree related commands
See the quick reference at the end of this chapter for a command list
separated by subject.
2-5