Download SATO CL608VA Operator`s manual

Section 4. Programming Reference
Fonts WB, WL, XB & XL
Command Structure
Font WB: <ESC>WBa
Font WL: <ESC>WLa
a
Command Function
=
0
1
Font XB: <ESC>XBa
Font XL: <ESC>XLa
Disables auto-smoothing of font
Enables auto-smoothing of font (see notes below)
Example:
<ESC>WB1123456
Placement:
Preceding the data to be printed
Default:
None
To print text images on a label. These are the four auto-smoothing
fonts available on the printer.
NON-PROPORTIONAL
WB
18W x 30H dot matrix
WL
28W x 52H dot matrix
XB
XL
PROPORTIONAL(1)
48W x 48H dot matrix
48W x 48H dot matrix
(1) These fonts will be printed with proportional spacing only if preceded by an
<ESC>PS command.
Input to Printer
ESC>A<ESC>PS
<ESC>H0001<ESC>V0100<ESC>WB0CL408
<ESC>H0001<ESC>V0185<ESC>WB1CL408
<ESC>H0001<ESC>V0270<ESC>WL0CL408
<ESC>H0001<ESC>V0355<ESC>WL1CL408
<ESC>H0300<ESC>V0100<ESC>XB0CL408
<ESC>H0300<ESC>V0185<ESC>XB1CL408
<ESC>H0300<ESC>V0270<ESC>XL0CL408
<ESC>H0300<ESC>V0355<ESC>XL1CL408
<ESC>Q1<ESC>Z
Printer Output
Page 4-38
9001035 Rev. E
SATO CL Series Printers