Download Pneumatic Application & Reference Handbook
Transcript
Section IV: Circuits Two-Hand Extend with Automatic Return This circuit is useful for applications where cycle time and safety is an issue. With the Automatic Return feature, the operator's hands are tied down and the cylinder will return when the work is completed, not when the operator removes their hands from the actuator. Operator uses Mead CSV-102 (Two-Hand Control) to extend the cylinder. If one or both hands are removed, the cylinder returns. If the limit is reached, the cylinder will auto return even if the operator's hands remain on the two-hand control. When actuated, CSV-102 pilots the Double Air Pilot Four-Way Valve to allow air to the Air Pilot Spring Return Valve. When released, the CSV-102 pilots the Double Air Pilot Four-Way Valve back to the original position. The Impulse Relay takes the constant input from the CSV-102 and changes it to an impulse allowing for the auto-return from the Limit Switch. Bill of Material with Typical Mead Components Component CSV-102 Impulse Relay Double Air Pilot Four-Way Valve Shuttle Valve Air Pilot, Spring Return Valve Limit Switch Mead Part Number CSV-102 414B N2-DP SV-1 N2-SP MV Type The suggested components will accommodate up to a 4″ Bore Cylinder. Contact Mead if your application requires a larger bore cylinder. -37-