Download Pneumatic Application & Reference Handbook

Transcript
Section IV: Circuits
Two-Hand Extend with Automatic Return
This circuit is useful for applications where cycle time and safety is an issue. With the Automatic
Return feature, the operator's hands are tied down and the cylinder will return when the work is
completed, not when the operator removes their hands from the actuator.
Operator uses Mead CSV-102 (Two-Hand Control) to extend the cylinder. If one or both hands are
removed, the cylinder returns. If the limit is reached, the cylinder will auto return even if the operator's hands remain on the two-hand control.
When actuated, CSV-102 pilots the Double Air Pilot Four-Way Valve to allow air to the Air Pilot
Spring Return Valve. When released, the CSV-102 pilots the Double Air Pilot Four-Way Valve back
to the original position. The Impulse Relay takes the constant input from the CSV-102 and changes
it to an impulse allowing for the auto-return from the Limit Switch.
Bill of Material with Typical Mead Components
Component
CSV-102
Impulse Relay
Double Air Pilot Four-Way Valve
Shuttle Valve
Air Pilot, Spring Return Valve
Limit Switch
Mead
Part Number
CSV-102
414B
N2-DP
SV-1
N2-SP
MV Type
The suggested components will accommodate up to a 4″ Bore
Cylinder. Contact Mead if your application requires a larger bore
cylinder.
-37-