Download American Dynamics ADCC1100 Specifications

Matrix Installation and Operation
INSTALLATION IS ONLY TO BE CARRIED OUT BY COMPETENT, QUALIFIED AND EXPERIENCED PERSONNEL.
WIRE IN ACCORDANCE WITH COUNTRY OF INSTALLATION NATIONAL WIRING REGULATIONS.
ACCESS CAN ONLY BE GAINED BY SERVICE PERSONS. THERE ARE NO USER-ACCESS AREAS. ACCESS
BY SERVICE PERSONS CAN ONLY BE GAINED BY THE USE OF AN APPROPRIATE TOOL.
THE EQUIPMENT SUPPLIED WITH THIS MANUAL IS DESIGNED FOR USE IN GENERAL PURPOSE CCTV
INSTALLATION AND HAS NO OTHER FUNCTION. DO NOT EXCEED THE VOLTAGE AND TEMPERATURE
LIMITS GIVEN IN THE SPECIFICATIONS. ONLY USE YOUR MATRIX IN A CLEAN, DRY, DUST-FREE
ENVIRONMENT.
TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THE MEGAPOWER LT MUST ONLY BE POWERED BY THE CLASS 2 INSULATED UL LISTED 15 WATT LPS
SUPPLY (MP-PSU) PROVIDED.
POWER ISOLATION MUST BE PROVIDED VIA THE: PLUG; APPLIANCE COUPLER; ISOLATING SWITCH;
CIRCUIT BREAKER, OR AN EQUIVALENT ELECTRICAL DEVICE IN CLOSE PROXIMITY TO THE EQUIPMENT.
A 3 AMP FUSE IN THE UK PLUG PROVIDES PROTECTION AGAINST OVERLOAD AND SHORT CIRCUIT. IN
AREAS WHERE A UK PLUG IS NOT APPROPRIATE, SIMILIAR PROTECTION MUST BE PROVIDED IN THE
INSTALLATION.
Electrical Safety
British Standard BSEN60950:2001 Safety of information technology equipment Including electrical business
equipment.
Underwriters Laboratories Inc. UL1950 Safety of information technology equipment, including electrical business
equipment.
Canadian Standards Association CAN/CSA C22.2 No. 950-95.
Radio Frequency Emissions
British Standard EN50081-1:1992 Electromagnetic compatibility - Emission. Part 1. Residential, commercial and
light industry.
British Standard BSEN55022:1998 Limits and methods of measurement of radio disturbance characteristics of
information technology equipment.
Immunity
British Standard BSEN50130-4 Alarm Systems Part 4 Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems.
EU Conformance Statement
A Declaration of Conformity in accordance with the above EU standards has been made and is on file with the
manufacturer. The manufacturer declares that the product supplied with this document is complaint with the provisions of the EMC Directive 89/336 EEC, the Low Voltage Directive LVD 73/23 EEC, the CE Marking Directive 93/68
EEC and all associated amendments.
Regulatory Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
iii