Download AMT Datasouth 4000 User`s guide

Setup Feature and Value List (continued)
Vert Print Align
[ -0.50 - +0.50 ] (Inches)
Adjust to move printed image up
or down on label. Positive
values move image up.
Negative values move image
down.
Horz Print Align
[ 0.00 - 1.00 ] (Inches)
Adjust to move printed image
left or right. Larger values move
the image to the right.
Vert Size Adjust
[ -60 - + 60 ]
Vertically expands or
compresses print image.
Negative values are
compressed, positive values are
expanded.
Print Darkness
[ -12 - +12 ]
Adjust for optimal print
darkness. Positive values are
darker.
Print Speed
[ 2, 3, 4, 5, 6] (IPS)
Adjusts print speed.
Interface Select
[ Parallel Only, Serial Only, Auto
Select ]
Selects active interface while
ignoring non-selected interface.
Setting to Auto Select enables
both interfaces and performs
automatic port arbitration.
COM1: Baud Rate
[ 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 ]
Set to match host.
COM1: Parity
[ None, Odd, Even ]
Set to match host.
COM1: Data Bits
[ 7, 8 ]
Set to match host.
COM1: Handshake
[ RTS, XON/XOFF, RTS & XON,
None ]
Set to match host.
COM1: PAL Xmit
[ Enabled, Disabled ]
Enables or disables
transmission of PAL messages
over serial interface.
User's Guide 37