Download Miranda HMP-1801 Instruction manual

GUIDE TO INSTALLATION AND OPERATION
Rear adapters:
A 3-RU rear module adapter is available for double-slot-width Densité-2 rear panels:
o
DENSITE DRP-3RU
Install it as follows:
1. Position the adapter at the top of the empty
slots on the rear of the frame.
2. Use the captive screw in the adapter to
fasten it securely in position.
(the figures show a single-width adapter and rear
panel, but the installation procedure is identical)
3. Slip the top of the 2RU rear panel into the slot
at the bottom of the adapter, and secure it to
the frame using the captive screw at the
bottom of the panel.
HMP-1801 | 9