Download Multitech MTCMR-H User guide
Transcript
Chapter 3 – Supported GSM/WCDMA AT Commands <length> <mr> <pdu> <ra> <sca> <st> <stat> <stat> <tora> <tosca> <alpha> <data> <vp> Text Mode (AT+CMGF=1): Number of Characters PDU Mode (AT+CMGF=0): Length of the TP Data Unit in Bytes Integer type Message Reference Integer type SMS User Data in PDU Mode String type (hexadecimal format) Recipient Address String type Service Center Address String type Status of a SMS-STATUS-REPORT Integer type Status of Message in Memory (PDU Mode) 0 Received unread messages 1 Received read messages 2 Stored unsent messages 3 Stored sent messages Status of Message in Memory (Text Mode) “REC UNREAD” Received unread messages “REC READ” Received read messages “STO UNSENT” Stored unsent messages “STO SENT” Stored sent messages Type of Address of <ra> 129 ISDN / telephony numbering plan, national / international unknown 145 ISDN / telephony numbering plan, international number 161 ISDN / telephony numbering plan, national number 128-255 Other values (refer GSM 04.08 section 10.5.4.7) Type of Address of <sca> 129 ISDN / telephony numbering plan, national / international unknown 145 ISDN / telephony numbering plan, international number 161 ISDN / telephony numbering plan, national number 128-255 Other values (refer GSM 04.08 section 10.5.4.7) Associated Phonebook Name String type SMS User Data in Text Mode String type Validity Period In text mode is only coded in "relative" format. This means that one byte can describe different values. 0 to 143 (VP + 1) x 5 minutes (up to 12 hours) 144 to 167 12 hours + ( (VP – 143) x 30 minutes ) 168 to 196 (VP – 166) x 1 day 197 to 255 (VP – 192) x 1 week Examples: Command AT+CMGR=1 Note: Read the message AT+CMGR=1 Note: Read the message again AT+CMGR=2 Responses AT+CMTI: “SM”,1 Note: New message received +CMGR: “REC UNREAD”, ”0146290800”,”98/10/01,18:22:11+00” ABCdefGHI OK +CMGR: “REC READ”, ”0146290800”,”98/10/01,18:22:11+00” ABCdefGHI OK Note: Message is read now OK Note: Location empty High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 68