Download Allen-Bradley 2-D User manual

5–16
Communication Setup (Synapse Cable)
Setting DEC VT220 / VT320 / VT420 Keyboard Wedge
Synapse Cable Options
This section defines the communication options available when the
scanner is connected to this DEC Keyboard Wedge Synapse cable:
• Catalog No. 2755-HFC-SV1-01
Default Settings
Scan the Set DEC VT 20/320/420 Wedge Synapse Cable Defaults
bar code to set the Synapse cable to default settings. The table below
lists the defaults.
Parameter
Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host
DEC VT220 / 320
5–16
5-2
Country
North American
5–17
5-2
Unknown Characters
Send Bar Codes With
Unknown Characters
5–17
5-4
Intercharacter Delay
5 Millisecond
5–17
5-4
Parameter Set
Parameter Set 1
5–18
5-5
➀ Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)
Host Selection
Select the type of host the scanner will be communicating with.
The selections are:
• DEC VT 220/320 (default)
• DEC VT420
Publication 2755-6.4