Download Multitech MT5634HD16 User guide

6. Type install.
7. The Install Options window appears.
In the Operating System field, select the operating system on which the installation is to be performed. Press ENTER to see the options, which are Novell and
Any Other. If you select Novell, you can install RASExpress Server to a network
drive or to a local drive. If you select Any Other, you can install only to a local
drive. On the CommPlete Communications Server, install RASExpress as Any
Other. Press ESC.
8. The Ethernet Card Information window appears.
Select the Card Type field and press ENTER to see the list of network interface
card (NIC) types for which RASExpress can be installed. To install RASExpress
for the CommPlete Ethernet interface, choose the COMMPLETE option, then
press ESC to continue.
9. In the Enter path name for Network drivers field, type the path to the directory
where you want the RASExpress files to be copied, then press ENTER. By default,
the drivers will be copied to C:\RAS550. To accept the path and continue with
the installation, press ESC.
10. A window appears that shows the progress of the files as they are copied from
the source directory to the destination directory.
11. The RASExpress Server Configuration utility starts. Use the utility to configure
the RASExpress server, as explained in “RASExpress Server Configuration” on
page 187.
12. Press ESC when you have finished configuring the RASExpress server. A message
about your AUTOEXEC.BAT and CONFIG.SYS files appears. Press any key after
you have read the message. The original files are saved as AUTOEXEC.000, .001,
.002, etc., and CONFIG.000, .001, .002, etc.
13. The Licensing Information window appears.
In the Name field, type the name of the person for whom you installed the
RASExpress server. It can be up to 17 characters long.
In the Organization field, type the name of the organization for which you installed the RASExpress server. It can be up to 50 characters long.
CommPlete Communications Server
185