Download Multitech MT5634HD16 User guide

B
Upgrading RASExpress
If you use TFTP, the compressed file is automatically placed in the RASExpress
directory on the server. If you use an FTP program, you must specify the current
RASExpress directory (e.g., C:\RAS550).
6. When the transfer is complete, use Telnet to access the server(see Chapter 3). The
Telnet main menu now includes a fourth option:
Services provided by the telnet server
[ 1] Dial out
[ 2] Management of RASExpress server
[ 3] Configuration of RASExpress server
[ 4] Upgrade Server
[Esc] Close the telnet session
Enter your choice[1 to 4] :
7. Type 4 and press ENTER to select the fourth option, Upgrade Server. The
following messages appear:
Enter your choice[1 to 4] : 4
[ESC] to go to previous menu
Enter your upgrade key :
8. Type anything you like for the key, and then press ENTER. The connection is
broken, and RASExpress is automatically upgraded.
When RASExpress is upgraded, the file UPGRADE.LOG is created on the server
in the RASExpress directory. This file contains details of the upgrade that can be
reviewed using any ASCII text viewer, such as Notepad.
9. The upgrade is complete. To upgrade another RASExpress server, repeat steps 4–9.
Initiating the New Port Names
A feature new in RASExpress 5.30 is that RASExpress identifies ports the same way
as MultiCommManager. Ports are now named 2A, 2B, 2C, etc., instead of B1_LINE1,
B1_LINE2, B1_LINE3, etc.
If you upgrade to RASExpress 5.50 from version 5.29 or earlier, the old names are
retained. To use the new names, you must delete the ISI cards from ISI Setup and
reboot the server. When the server reboots, it automatically detects the ISI cards,
reinstalls them, and uses the new names.
CommPlete Communications Server
235