Download APPENDIX AVI212 Specifications

Gaia
GAIA.ASU.SP.ESM.00007
Issue 2.00
Page 69 of 79
7.4 Verification Process
AVI-2102/CREATED/R
The verification process activities shall be incrementally performed at different levels and in different
stages applying a coherent bottom-up concept and using a suitable combination of different
verification methods.
AVI-2103/CREATED/R
The verification process flow shall be subdivided into the following steps:
Identification and classification of all the requirements to be verified
Selection of verification criteria (methods/levels/stages) against identified requirements
Establishing the planning for the associated verification activities
Obtain customer concurrence
Performance of verification tasks and verification control
Completion of verification control and evidence for verification close-out
Customer review and final approval.
7.5 Project Specific Verification Requirements
AVI-2120/CREATED/
Requirements verification shall be controlled in accordance with the following methods: (listed in order
of preference)
Test
Analysis
Review of Design
Inspection
Similarity
AVI-2132/CREATED/R
The contractor shall apply the verification methods, as defined in this specification, for each
requirement (see Section 1.2).
AVI-2133/CREATED/R
The subcontractor shall establish the verification documentation as defined in the Document Delivery
List of the Avionics SCOE SOW.
AVI-2134/CREATED/R
The subcontractor shall report the verification status for each requirement.
Astrium Ltd owns the copyright of this document which is supplied in confidence and which shall not be used for any purpose other than that for which it is supplied and shall not in
whole or in part be reproduced, copied, or communicated to any person without written permission from the owner.
GAIA.ASU.SP.ESM.00007 (Avionics SCOE Req Iss 2).doc