Download AMX NI-2000 Hardware reference guide
Transcript
Introduction NI-3000 Specifications The front LEDs (FIG. 3) are grouped by control type and are labeled according to their corresponding port (connector) numbers on the rear of the unit. The back of the this unit contains RS-232/422/485, Relay, IR/Serial and I/O connectors. In addition, this unit provides an ID pushbutton, AXlink LED, and other related connectors. FIG. 4 shows the front and rear of the NI-3000. FIG. 3 NI-3000 NetLinx Integrated Controller (front view) Link/Active-Status-Output-Input RS-232/422/485 TX/RX LEDs (red/yellow) Relay LEDs (red) IR/Serial LEDs (red) I/O LEDs (yellow) Front ICSNet (2) Rear RS-232/422/485 (Ports 1-7) Relays (Port 8) ICSHub Out IR/Serial (Ports 9-16) I/O (Port 17) Program port DIP switch Ethernet AXlink LED (green) AXlink port PWR ID Pushbutton FIG. 4 NI-3000 front and rear panel components 6 NI-2000, NI-3000, NI-4000 Hardware Reference Guide