Download AMX NI-2000 Hardware reference guide

Transcript
Introduction
NI-3000 Specifications
The front LEDs (FIG. 3) are grouped by control type and are labeled according to their corresponding
port (connector) numbers on the rear of the unit. The back of the this unit contains RS-232/422/485,
Relay, IR/Serial and I/O connectors. In addition, this unit provides an ID pushbutton, AXlink LED, and
other related connectors. FIG. 4 shows the front and rear of the
NI-3000.
FIG. 3 NI-3000 NetLinx Integrated Controller (front view)
Link/Active-Status-Output-Input
RS-232/422/485 TX/RX LEDs (red/yellow)
Relay LEDs (red)
IR/Serial LEDs (red)
I/O LEDs (yellow)
Front
ICSNet (2)
Rear
RS-232/422/485 (Ports 1-7)
Relays
(Port 8)
ICSHub Out
IR/Serial (Ports 9-16)
I/O (Port 17)
Program
port
DIP
switch
Ethernet
AXlink LED
(green)
AXlink
port
PWR
ID Pushbutton
FIG. 4 NI-3000 front and rear panel components
6
NI-2000, NI-3000, NI-4000 Hardware Reference Guide