Download Microscan MS-Q Imager User`s manual

Communications
Parity (RS-232)
Parity is an error detection routine in which one data bit in each character is set to 1 or 0
so that the total number of 1 bits in the data field is even or odd. It only needs to be
changed if necessary to match the host setting.
None (Default)
Even
Odd
Stop Bits (RS-232)
Stop Bits are added to indicate the end of each character. This setting should only be
changed if necessary to match the host setting.
2 Stop Bits (Default)
1 Stop Bit
Data Bits (RS-232)
Data Bits are the total number of bits in each character. This setting only needs to be
changed if necessary to match the host setting.
8 Data Bits (Default)
7 Data Bits
Timeout Settings (Cabled)
This feature sets the amount of time a cabled MS-Q will be enumerated before entering
Sleep Mode in order to charge the battery more quickly.
Cabled Timeout Never (Default)
Save
Settings
MS-Q Imager User’s Manual
Default
to USB
Cabled Timeout 2 Hours (Default)
Default
to PS/2
Clear
All Data
Clear
XML
Rules
4-7