1
Download Enterasys 2H23-50R Specifications
Transcript
Process Overview: Routing Protocol Configuration Configuring IRDP 13.1.4 Configuring IRDP Purpose To enable and configure the ICMP Router Discovery Protocol (IRDP) on an interface. This protocol enables a host to determine the address of a router it can use as a default gateway. Commands The commands needed to enable and configure IRDP are listed below and described in the associated section as shown: • ip irdp (Section 13.1.4.1) • ip irdp maxadvertinterval (Section 13.1.4.2) • ip irdp minadvertinterval (Section 13.1.4.3) • ip irdp holdtime (Section 13.1.4.4) • ip irdp preference (Section 13.1.4.5) • ip irdp address (Section 13.1.4.6) • no ip irdp multicast (Section 13.1.4.7) • show ip irdp (Section 13.1.4.8) 13.1.4.1 ip irdp Use this command to enable or disable IRDP on an interface. ip irdp Syntax Description None. Command Syntax of the “no” Form The “no” form of this command disables IRDP on an interface: no ip irdp Command Type Router command. 13-68 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
